You are here

Home » Products

(Prices on site not guaranteed, check with MTC before ordering.)

buttons01.jpg

All Wrist Pin Buttons and Cir-Clips are sold in pairs.

cir_clips.jpg

Wrist Pin Buttons (All $11.55) (09/01/12 Price)

KAW (KZ900/1000) and (GPZ1100) (81-84)

DIAMETER LENGTH (in)

BORE SIZE
(SWP)

BORE SIZE
(TSP)

PART NUMBER
17mm 0.243 70mm 71mm WPB-17-243
0.282 72mm 73mm WPB-17-282
0.322 74mm 75mm WPB-17-322
0.342 75mm 76mm WPB-17-342
0.361 76mm 77mm WPB-17-361
0.381 77mm 78mm WPB-17-381
0.401 78mm 79mm WPB-17-401
0.420 79mm 80mm WPB-17-420
0.440 80mm 81mm WPB-17-440
0.460 81mm 81mm WPB-17-460
0.479 82mm 83mm WPB-17-479
0.499 83mm 84mm WPB-17-499
0.519 84mm 85mm WPB-17-519
0.538 85mm 86mm WPB-17-538

SUZ (GS1100)

DIAMETER LENGTH (in)

BORE SIZE
(SWP)

BORE SIZE
(TSP)

PART NUMBER
18mm 0.268 72mm 72mm WPB-18-268
0.287 73mm 73mm WPB-18-287
0.307 74mm 74mm WPB-18-307
0.327 75mm 75mm WPB-18-327
0.347 76mm 76mm WPB-18-347
0.366 77mm 77mm WPB-18-366
0.386 78mm 78mm WPB-18-386
0.425 80mm 80mm WPB-18-425
0.464 82mm 82mm WPB-18-464
0.484 83mm 83mm WPB-18-484
0.504 84mm 84mm WPB-18-504
0.523 85mm 85mm WPB-18-523

SUZ (GS1150/GSXR)

DIAMETER LENGTH (in)

BORE SIZE
(SWP)

BORE SIZE
(TSP)

PART NUMBER
20mm 0.267 74mm 71mm WPB-20-267
0.287 75mm 72mm WPB-20-287
0.306 76mm 73mm WPB-20-306
0.326 77mm 74mm WPB-20-326
0.346 78mm 75mm WPB-20-346
0.365 79mm 76mm WPB-20-365
0.385 80mm 77mm WPB-20-385
0.405 81mm 78mm WPB-20-405
0.424 82mm 79mm WPB-20-424
0.444 83mm 80mm WPB-20-444
0.463 84mm 81mm WPB-20-463
0.483 85mm 82mm WPB-20-483
0.503 86mm 83mm WPB-20-503
0.523 87mm 84mm WPB-20-523
0.538 88mm 85mm WPB-20-538
0.558 89mm 86mm WPB-20-558

Clips

Installing Wire Locks

  • 1. Install the end of one lock at 90 degress from the pick lock groove.
  • 2. Use a stiff small bladed screwdriver and insert the tip into the pick lock groove while you wedge the lock into the groove without kinking or deforming the lock.
  • 3. After the first lock is in place, seat the lock by solidly hitting the wrist pin with a brass drift pin.
  • 4. Now install the connecting rod and the second lock.
  • 5. Seat the second lock in the same manner as the first.
  • CAUTION: Just as a precaution, we recommend hitting each side of the wrist pin with the brass drift pin an additional time.
  • NOTE: Perform these functions on a cloth towel or soft rubber pad so no damage to the piston occurs.
DESCRIPTION PART NUMBER 09/01/12
PRICE
15mm CIR-CC15 $2.40
16mm CIR-CC16
17mm CIR-CC17
18mm CIR-CC18
19mm CIR-CC19
20mm CIR-CC20
21mm CIR-CC21
22mm CIR-CC22
23mm CIR-CC23
0.927in CIR-CC927 $4.15