You are here

Home » Products » Clutches

This new clutch called the "Gen II Multistage Clutch" is designed and built with the same robustness as MTC has used for over 40 years in making the best products in the racing industry.

This clutch significantly reduces clutch lever efforts and yet improves clutch adjustability through its "multistage" technology.

The new design runs on engine RPM, and demonstrates a quicker reaction time and more repeatability between passes.  The new design also allows for easier dynamic spring replacement with its quick access cover plate over the springs.

Now also available for the Yamaha Banshee ATV

Prices on site not guaranteed, check with MTC before ordering

MODEL CORES REQUIRED PART NUMBER 09/01/12
PRICE
BUELL (S&S) Outer basket w/gear & inner hub GMS-BU500 $1,887.00
Cores supplied by MTC and included in price GMS-BU500NC $2,193.00
HD PRO-SERIES Outer basket w/gear & inner hub GMS-HDP500 $1,989.00
KAW (KZ900/1000) Outer basket w/gear & inner hub GMS-KZ500 $1,912.50
Cores supplied by MTC and included in price GMS-KZ500NC $2,116.50
KAW (ZX-14) (Up to 2011)
(Later years call)
Outer basket w/gear & inner hub GMS-ZX14-500 $1,836.00
SUZ (GS1100/1150) Outer basket w/gear & inner hub GMS-GS500 $1,912.50
Cores supplied by MTC and included in price GMS-GS500NC $2,254.20
SUZ (GSX1300R HAYABUSA) Outer basket w/gear & clutch cover GMS-HYB500 $2,238.90
Cores supplied by MTC and included in price GMS-HYB500NC $2,397.00
SUZ (GSXR1000) (2001-08) Outer basket w/gear, & inner hub (must be 2001-04).
NOTE: Must run 2001-04 Steels
GMS-GSXR500 $1,530.00

 

ITEM DESCRIPTION PART NUMBER 01/01/11
PRICE
Tuner Kit Includes shims, weights, multistage springs, and spring cover screws GMS-TUNER-KIT $78.05

 

new16MultiStage Clutch for Yamaha Banshee ATV

MODEL CORES REQUIRED PART NUMBER 09/01/12
PRICE
YAM (BANSHEE) NONE GMS-BANS500 $1095.00

 

ITEM DESCRIPTION PART NUMBER 09/01/12
PRICE
ATV Gen II Tuner Kit Includes shims, weights, multistage springs, and spring cover screws GMS-ATVTUNER-KIT $78.05

 

Gen II Multistage Simulation Software

GMS-SW101    $400.00  as if 09/01/2012

This software has the ability to take all the variables associated with the clutch setup and provide an output in graphical form indicating the pressure load on the clutch.

It allows you to maintain the previous set up and then run “what if” scenarios of proposed changes.

Since the Gen II runs on engine RPM, adding the primary ratio allows the plate load to be associated with engine RPM’s in determining required forces to lock up the clutch under varying engine RPMs.